LARZEP cylinders are made of the highest quality materials. Our wide ranges of products are able to perform all kind of industrial applications such as: lifting, pushing, pulling, bending, holding, etc. The Quality System UNE-EN ISO9001:2000 and the compliance with the standard ANSI-B30.1 guarantees the design, manufacturing, supply and after-sales services.
All our cylinders are designed with a factor of safety of 1,5 to meet the requirements of the European Standards CE and all our products are tested individually in order to maximize the quality and the safety of them all.

Hand Pump range of products, the 'W' range is for single acting cylinders.
These pumps are compact, lightweight and portable, and they can operate horizontally or vertically, with the pump head downwards.
The 'X' range of Hand Pumps is for use with double acting cylinders, and systems, so these pumps are supplied with 4 way 2 outlet valve.
The LARZEP hydraulic electric pumps are useful to power medium to big load cylinders or multiple cylinder circuits.
In addition to a wide range of tanks (2-100 litres), the availability of eight kinds of pumps of different performances and possibilities as far as valves and motors are concerned will provide an easy selection of the most suitable pump for each application.

The AP Series 700 have a working pressure of 700 bar, an oil capacity of 35 cm3/m and 3/8 NPT ends.

Connectors EN 362

Our Lifting Slings (web slings) are manufactured in the UK and can be delivered anywhere in the world.
They meet the toughest UK and European standards.

Duplex webslings offer 2 layers of webbing with Soft Eyes at each end. Simplex (Single Layer) and Double Duplex 4 layer are also available.

For sizes outside the options shown - please email us at info@swl.uk.com

Ideally suited for General and Heavy Industrial lifting, our roundslings are as strong as steel, yet lightweight and easy to handle.
Constructed of 100% polyester load-bearing yarns with no seams there is no weakening the strength of the sling.

When buying a CROSBY product you are buying Quality.
The Crosby brand is the most recognized brand name in the industry.
These products have been the choice of several generations of end users.

Manually operated chain blocks and Lever hoists are used to lift/pull loads, and are very easy to install.
They are usually attached to a beam clamp or trolley to improve manoeuverability.

Our Plate clamps have been designed and developed over many years and after extensive research and field testing.
The non-welded clamps incorporate many innovative design features.

For more information call us on +44 (0) 1349 852187 or email us at info@swl.uk.com.

This robust range of Beam clamps and trolleys are designed for quick installation on a steel beam.
The opening can be adjusted to suit various commonly available profiles.
Once installed, a lifting device (chain block or lever hoist) can be inserted onto the ring by using a hook.

TIRFOR machines are highly Portable Manual Hoists used in conjunction with a MAXIFLEX wire rope.
They can be used to pull, position and lift substantial loads over unlimited distances, depending on the length of the wire rope.

Available as a Single, 2, 3 or 4 leg configuration.
In deciding what size of chain is required, please refer to our working load limit chart.
If you require your chain sling to be terminated with a Hook other than a Safety Sling Hook,
please call us on +44 (0) 1349 852187 or email us at info@swl.uk.com.

SWL are major stockists of YALE, TRACTEL, MORRIS and GIS electric chain and wire rope Hoists.
They are available in 3 phase, 230v, 110v and pneumatic motor type.

THIS SECTION IS BEING REVISED

For more information call us on +44 (0) 1349 852187 or email us at info@swl.uk.com.

SWL specialise in the Manufacture of any wire rope slings. We can press up to 48mm diameter wire rope, available as a Single, 2, 3 or 4 leg format.

To help you decide the size of wire rope you require, please refer to our Working Load Limit chart.

In this section you will find a comprehensive range of General Lifting Equipment which includes: Crosby Rigging Accessories Turnbuckles Collared Eyebolts Pad Eyes Wire Rope Grips

SWL provide a comprehensive Inspection & Testing service, which helps to ensure that equipment bought stays in service. We have recently extended our capabilities by investing in a Hydraulic test bed with a capacity of 400 tonnes, for the testing of large wires, chains and anchors. The width of this new test bed (1.3 metres) enables us to test very large objects such as Tow Heads, Hung Oft Clamps etc. For more information, email us at info@swl.uk.com or call us on +44 (0)1349 852187.